Feedback

Dust Mite and Humidity

Dust mite allergens have been proven to be an important trigger for people suffering from asthma and other respiratory diseases.  Mites need humid conditions to thrive and unfortunately most homes in the UK are sufficiently humid for the mites to do well. The average bed could be home to up to 1.5  million house dust [...]

Filed under: Articles | Posted on November 22nd, 2013 by Evelyn Dzekpedzi | No Comments »

Indoor Air Quality and Winter.

Winter weather makes homeowners to tightly seal any cracks in insulation that could allow cold drafts into the home. This raises the concentrations of both allergens and pollutants in the home. Therefore a combination of this, with the fact that We spend more time indoors can trigger allergies, illness and episodes of asthma. Pollutants in [...]

Filed under: Articles | Posted on November 21st, 2013 by Evelyn Dzekpedzi | No Comments »

How do you know if your indoor air is infected with bacteria?

Bacteria are very tiny microscopic organisms that can barely be seen with the naked eye. These microbes in general are essential for living in our natural environment. They can be found in the air, on our skin and on our food. However, some can be very hazardous and even deadly. Certain disease causing bacteria are [...]

Filed under: Articles | Posted on September 11th, 2013 by Evelyn Dzekpedzi | No Comments »

Aerial thermography cannot be left out in the wide spectrum of thermal imaging applications

Aerial thermal imaging survey is one method used to illustrate the issues being faced by cities and industries in the attempt to cut costs and conserve energy. This technique employs high resolution and sensitive thermal imagers usually mounted on airplanes or helicopters. These cameras measure the relative heat emissions from buildings, industrial sources and landfill [...]

Filed under: Articles | Posted on August 26th, 2013 by Evelyn Dzekpedzi | No Comments »

Who can use a clamp meter?

A clamp meter is simply an electrical tester that combines the features of a digital multimeter and a current sensor. The function of a clamp meter is to measure current. Clamp meters usually are designed with jaws integrated into an electrical meter allowing users to clamp around wires, cables and other conductors in an electrical [...]

Filed under: Articles | Posted on August 26th, 2013 by Evelyn Dzekpedzi | 7 Comments »

Get the best coating thickness measurement experience from Extech CG204

Coating thickness is a major concern for finishers and companies receiving finished components. It plays a role in product quality, process control and cost control. Substandard coatings lead to rust. For this reason, product liability requires quality control of coatings. It is important to make electronic documentation of coating thickness measurements. It is also vital [...]

Filed under: Articles | Posted on August 20th, 2013 by Evelyn Dzekpedzi | No Comments »

Make your customer satisfied with quality and efficient inspection devices

With the advancement of technology and innovative methods of conducting building and industrial inspections, there is also the need for professionals to also direct their attention to adapting to the demand of quality services. Due to the limitations of certain inspection devices, it is quite difficult to obtain fine and accurate results. However, stress-free home [...]

Filed under: Articles | Posted on August 16th, 2013 by Evelyn Dzekpedzi | No Comments »

Monitor atmospheric conditions and protect your employees health

Certain types of work in industrial settings demand muscular labour. However, indoor environmental conditions can seriously affect the body and output of workers. It has been noticed that due to the nature of work in the industrial shops and mines, temperature and humidity levels are very high. Workers in such places often lack the ability [...]

Filed under: Articles | Posted on August 13th, 2013 by Evelyn Dzekpedzi | 5 Comments »

Are the conditions in the classroom helping children?

Children have the weakest immune systems and are particularly vulnerable to all kinds of contaminants since their breathing and metabolic rates are high. These pollutants may come as a result of inappropriate temperature and humidity levels. When children are exposed to pollutants, they can easily get allergic reactions or they may suffer poor health. Proper [...]

Filed under: Articles | Posted on August 7th, 2013 by Evelyn Dzekpedzi | 4 Comments »

Get the right results for water testing with Extech EC500

Water treatment is very important to acquiring safe and clean water. There are several factors that can render water impure. Water conductivity is linked directly to the concentration of ions and their mobility. This conductivity depends on the value of the pH, temperature measurement and the amount of Carbon dioxide which has been dissolved in [...]

Filed under: Articles | Posted on August 5th, 2013 by Evelyn Dzekpedzi | 1 Comment »

Categories

PAGES

LATEST VIDEO POSTINGS

Take a look at how the Paris Air show 2013 looks through Flir thermal imaging camera.  

Do you want to see how Paris Air show 2013 looks through thermal imaging camera?
© Air Concern Limited
Company Registration Number 6809151. VAT No. GB 98926459
Registered Office 10 Caldecott Chase, Abingdon, Oxon, OX14 5GZ