Feedback

Ensure product safety within a suitable temperature and humidity level

One of the contributing factors to the safety of the food, medicine or pharmaceutical products is ensuring appropriate temperature and humidity conditions. That is to say, the temperature and humidity level within which these products are stored and transported is very essential. Indoor environmental monitoring instruments or dataloggers are widely used in many industries, in [...]

Filed under: Articles | Posted on July 23rd, 2013 by Evelyn Dzekpedzi | No Comments »

Opt for Extech RHT50 humidity/temperature/pressure datalogger for its accuracy

In evaluating the relative humidity of a given area, some of the problems that might be faced when using testing equipments may pertain to a constant need for calibration and a test of device accuracy. Before the Extech RHT50 gets to your destination, be assured that it has already been tested and calibrated. This is [...]

Filed under: Product News and Promotions | Posted on July 23rd, 2013 by Evelyn Dzekpedzi | No Comments »

Measure environmental conditions with Extech RHT50 and analyze data on your PC

Data collected on humidity, temperature and atmospheric pressure  that has been stored on the Extech RHT50 datalogger can be downloaded onto a PC. This can be achieved by plugging the module into a PC’s USB port after which the PC software that has been supplied can also be run. The data can then be graphed, [...]

Filed under: Product News and Promotions | Posted on July 23rd, 2013 by Evelyn Dzekpedzi | No Comments »

Extech RHT50 datalogger can be used in any indoor environment

Extech RHT50 can be used in clean rooms, warehouse, storage rooms, freezers, shipping vans and water damage restorations to monitor and record humidity, temperature and atmospheric pressure. This datalogger can be mounted on the wall as it comes with a mounting bracket. Get acquainted with numerous ways in which you can use the Extech RHT50. [...]

Filed under: Product News and Promotions | Posted on July 23rd, 2013 by Evelyn Dzekpedzi | No Comments »

Use a humidity/temperature/pressure datalogger with status indication lights

As part of its construction, the datalogger has a USB connected which comes with an interface in order to easily transfer  all the humidity, temperature and atmospheric pressure data collected onto a PC. Extech RHT50 has Min/Max alarm thresholds that can be programmed by the user. Red/Yellow and Green LED are indication lights that inform [...]

Filed under: Product News and Promotions | Posted on July 23rd, 2013 by Evelyn Dzekpedzi | No Comments »

Extech is a highly regarded company

Extech has exceeded customer’s expectations by being the first company to offer a Type K thermocouple input on their multimeters and clamp meters. They are also the first to introduce test and measurement products that are handheld with datalogging capabilities and built in PC interface. These features serve as an enhancement and give Extech instruments [...]

Filed under: Product News and Promotions | Posted on May 28th, 2013 by Evelyn Dzekpedzi | No Comments »

What is a moisture meter used for?

A moisture meter is a device used to measure the amount of water in a particular material. The information gathered from a moisture meter can be used to determine if the material is ready for use or not. Also this device helps to identify unexpected dryness or wetness of the material. Paper products and wood [...]

Filed under: Articles | Posted on May 28th, 2013 by Evelyn Dzekpedzi | No Comments »

A temperature USB datalogger allows you to store and analyze data

This Extech data logger features Red, Yellow and Green LED lights. These lights are used to indicate the status of the device. The datalogger comes with a 3.6V Lithium battery. It can last for approximately 1 year. When this battery becomes weak or is replaced, there is no cause for alarm. This is because your [...]

Filed under: Product News and Promotions | Posted on May 15th, 2013 by Evelyn Dzekpedzi | No Comments »

Extech RHT10 offers more than RH and temperature monitoring

Extech RHT10 is ideal for monitoring humidity and temperature levels in warehouses, storage rooms, freezers, shipping vans, and at water damage restoration projects. The datalogger is a dependable and economically designed instrument. The meter has a long battery life which lasts for a year. See what the Extech RHT10 offers.

Filed under: Product News and Promotions | Posted on May 2nd, 2013 by Evelyn Dzekpedzi | No Comments »

Categories

PAGES

LATEST VIDEO POSTINGS

Take a look at how the Paris Air show 2013 looks through Flir thermal imaging camera.  

Do you want to see how Paris Air show 2013 looks through thermal imaging camera?
© Air Concern Limited
Company Registration Number 6809151. VAT No. GB 98926459
Registered Office 10 Caldecott Chase, Abingdon, Oxon, OX14 5GZ