|
 |
|
|
|
£327.34 (ex VAT) |
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
| Extech 451126 CFM/CMM Vane Anemometer Datalogger |
This Extech 451126 Vane-type Anemometer can indicate Air Velocity in five units of measure: Feet per minute, Meters per second, Miles per hour, Kilometers per hour, and Knots with Temperature displayed in oC or oF units. The meter can also display air flow in CFM or CMM. Extech 451126 has a built-in datalogger which can record up to 2000 readings and the RS-232 interface provides PC data transfer capability.
.... |
|
|
 |
|
|
£160.51 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
|
|
£75.64 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
| Extech 45158 Mini Thermo-Anemometer with Humidity |
Extech 45158 Mini Thermo-Anemometer with Humidity is a waterproof
pocket size device with Air Velocity, Temperature, Relative Humidity, Dew
Point, and Windchill. The Extech 45158 is able to measure the speed of wind in ft/min,
MPH, m/s, km/h, Knots and Beaufort Force. It has a selectable averaging
function of 5, 10, or 13 second intervals with a replaceable
non-corrosive plastic wind vane (impeller). It measures temperature from
0 to 122°F (-18 to 50°C).
.... |
|
 4 Review(s) |
|
|
|
£74.48 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
| Extech AN100 CFM/CMM Mini Thermo-Anemometer |
Extech AN100 CFM/CMM Mini Thermo-Anemometer does a large
display of Airflow or Air Velocity. This thermo-anemometer is ideal for HVAC installation, Repair,
Ventilation system installation, temperature test and analysis etc. Extech AN100 does
simultaneous display of Ambient Temperature and Air Flow or Air Velocity.
.... |
|
| 4 Review(s) |
|
|
|
£88.05 (ex VAT) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
| Extech AN500 Hot Wire CFM/CMM Thermo-Anemometer |
Extech AN500 is designed with new sensor technology that delivers major improvements in durability and ATC (Automatic Temperature Compensation) for accurate in-duct Air Velocity measurements with changing air temperatures. This thermo-anemometer telescoping probe with ruler label ensures that measurements are made in the center of the duct even if out of reach. Ergonomic directional handle and anti-rotation sensor confirms that probe direction and airflow direction are aligned for confident readings.
.... |
|
|
|
|
|
£133.29 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
| Extech EZ30 EzFlex Thermo-Anemometer |
The Extech EZ30 measures air velocity in five units of measure: feet per minute (ft/min), meters per second (m/sec), miles per hour (MPH), kilometers per hour (km/hr), & nautical miles per hour (knots). An internal Type K sensor allows the Extech EZ30 to measure air temperature in Celsius or Fahrenheit units. The 16” (406mm) flexible gooseneck provides easy access for air velocity and temperature measurement in difficult to reach locations. This Extech EZ30 meter is shipped fully tested and calibrated and with proper use will provide years of reliable service. .... |
|
|
|
|
|
£83.90 (ex VAT) |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
£188.43 (ex VAT) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
| Testo 410-2 - Compact Vane Anemometer (+Humidity) |
Testo 410-2 is designed for the measurement of air flow velocity, temperature and humidity. Testo's own patented humidity sensor guarantees reliable measurement results. Thanks to the integrated measurement with the 40 mm vane, it is ideally suited for fast spot checks at air vents. A timed mean value calculation is possible. The measuring instrument is very handy, small and easy to operate. .... |
|
|
|
|
|
£153.00 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
| Testo 416 - Vane Anemometer |
The compact Testo 416 is an easy to use vane anemometer with attached 16 mm (0.63 in) vane probe on a telescoping shaft. Just enter the duct area measurements directly into the Testo 416 and volume flow measurements (cfm) are shown on the clear display. Timed and multi-point mean flow calculations allow quick, easy and accurate airflow measurement. Min-Max values are one button simple, while the "Hold" function freezes the current readings in the display for easy data recording. .... |
|
|
|
|
|
£411.00 (ex VAT) |
|
|
|
|
|
|
|
|
 |
|
| Testo 417 - Vane Anemometer |
The compact Testo 417 anemometer kits is built-in flow/temperature vane Ø 100 mm to measure flow speed, volume flow and temperature. Volume flow is shown directly in the display. The accurate volume flow calculation is an easy input of duct area. In addition, it is easy to switch to the current temperature reading. The flow direction, i.e. drawn in or blowing is visible in the display. .... |
|
|
|
|
|
£304.00 (ex VAT) |
|
|
|
|
|
|
|
1 Review(s)
In Stock
Out-of-Stock
